To see comments, or add a comment to this discussion, click here.
This is a draft proposal, that has not yet been submitted. To submit this proposal, click on "Actions" in the toolbar above, then "Edit with form". At the bottom of the form, check the box that says "Submit this proposal to the IEEE History Committee for review. Only check this when the proposal is finished" and save the page.
To the proposer’s knowledge, is this achievement subject to litigation? No
Is the achievement you are proposing more than 25 years old? Yes
Is the achievement you are proposing within IEEE’s designated fields as defined by IEEE Bylaw I-104.11, namely: Engineering, Computer Sciences and Information Technology, Physical Sciences, Biological and Medical Sciences, Mathematics, Technical Communications, Education, Management, and Law and Policy. Yes
Did the achievement provide a meaningful benefit for humanity? Yes
Was it of at least regional importance? Yes
Has an IEEE Organizational Unit agreed to pay for the milestone plaque(s)? Yes
Has an IEEE Organizational Unit agreed to arrange the dedication ceremony? Yes
Has the IEEE Section in which the milestone is located agreed to take responsibility for the plaque after it is dedicated? Yes
Has the owner of the site agreed to have it designated as an IEEE Milestone? Yes
Year or range of years in which the achievement occurred:
Title of the proposed milestone:
First Electrically-Assisted Bike, 1993
Plaque citation summarizing the achievement and its significance:
The first 'electrically-assisted bike' was commercialized in 1993 by Yamaha Motor, for which pedaling was required, but the rider could derive battery-powered assistance to reduce necessary efforts. This type of vehicle varies in design detail, but assistance cuts out when the rider stops pedaling or when the speed exceeds specified thresholds. This vehicle is especially useful for people in hilly areas, since the motor provides assistance for going uphill.
In what IEEE section(s) does it reside?
IEEE Organizational Unit(s) which have agreed to sponsor the Milestone:
IEEE Organizational Unit(s) paying for milestone plaque(s):
Unit: Nagoya Section
Senior Officer Name: Masaaki Katayama
IEEE Organizational Unit(s) arranging the dedication ceremony:
Unit: Nagoya Section
Senior Officer Name: Masaaki Katayama
IEEE section(s) monitoring the plaque(s):
IEEE Section: Nagoya Section
IEEE Section Chair name: Masaaki Katayama
Proposer name: Isao Shirakawa
Proposer email: Proposer's email masked to public
Please note: your email address and contact information will be masked on the website for privacy reasons. Only IEEE History Center Staff will be able to view the email address.
Street address(es) and GPS coordinates of the intended milestone plaque site(s):
Yamaha Motor Co., Ltd. (Address: 2500 Shingai, Iwata, Shizuoka 438-8501, Japan. GPS coordinates; N 34.7237, E 137.8780 )
Describe briefly the intended site(s) of the milestone plaque(s). The intended site(s) must have a direct connection with the achievement (e.g. where developed, invented, tested, demonstrated, installed, or operated, etc.). A museum where a device or example of the technology is displayed, or the university where the inventor studied, are not, in themselves, sufficient connection for a milestone plaque.
Please give the address(es) of the plaque site(s) (GPS coordinates if you have them). Also please give the details of the mounting, i.e. on the outside of the building, in the ground floor entrance hall, on a plinth on the grounds, etc. If visitors to the plaque site will need to go through security, or make an appointment, please give the contact information visitors will need. Corporate Museum, Yamaha Motor Co., Ltd.
Are the original buildings extant?
The original building of Yamaha Motor Co., Ltd. is extent.
Details of the plaque mounting:
The plaque will be displayed in Corporate Museum of Yamaha Motor Co., Ltd.
How is the site protected/secured, and in what ways is it accessible to the public?
The plaque will be fixed on the wall of Corporate Museum of Yamaha Motor Co., Ltd.
Who is the present owner of the site(s)?
Mr. Yoshihiro Hidaka, President and CEO, Yamaha Motor Co., Ltd.
What is the historical significance of the work (its technological, scientific, or social importance)?
The historical significance on the ‘electrically-assisted bike’ is briefed as follows.
1. Historical Background of Commercializing ‘Electrically-Assisted Bikes’
Internationally, transport policy makers and urban planners are interested in encouraging cycling, given the potential to simultaneously achieve a number of goals, such as addressing congestion, encouraging a switch from more polluting modes and thereby reducing local air pollution and greenhouse gas emission, and increasing physical activity and thereby examining obesity and a range of other health issues. ‘Electrically-assisted bikes’ are one tool that may help to achieve these goals . Thus, a great number of people in Japan as well as in China, EU, India, Korea, and USA have been using eagerly all sorts of ‘electrically-assisted bikes’ since the release of the first product in 1993 [2,3].
2. Widespread Diffusion of ‘Electrically-Assisted Bikes’
The first ‘electrically-assisted bike’ released in 1993 by Yamaha Motor Co., Ltd. (Japan) was equipped with such a large low-powered motor and a bulky lead storage battery that once the battery was charged, the running distance of this vehicle managed to be extended to 20 km . The business chance of this type of vehicle grew so rapidly that several big companies rushed into this vehicle industry just after the release in 1993. In order that this vehicle might be much more widespread, each time a new model was planned every possible attempt was made to miniaturize motors, update lithium batteries, reduce vehicle weights, and extend running distances. In addition, owing to the drastic progress of electric assistance capability the running distance of this vehicle had been extended to 100 km or more by the end of 2016 , and moreover in 2020 the COVID pandemic suddenly brought an increased need for individualized transportation, such as these ‘electrically-assisted bikes’ .
What obstacles (technical, political, geographic) needed to be overcome?
In the early development phase, ‘electrically-assisted bikes’ encountered a number of severe obstacles, which were overcome as outlined below.
1. Obstacles to Using ‘Electric Bikes’
In the 1890s through the 1980s, a great variety of ‘electric bikes’, henceforth abbreviated to ‘e-bikes’, each with an integrated electric motor used to assist propulsion, were steadily developed and worldwide spread. A typical ‘e-bike’ was equipped with a set of fractional horsepower motors, connected through a series of gears , for which the sales price as well as the running cost was rising steeply. To cope with such growing expenses, in 1993 Yamaha Motor dared to develop a less expensive ‘e-bike’, called an ‘electrically-assisted bike’ , ‘pedelec’ [1,2,3], or ‘pedal-assist system’ , for which pedaling was required, but the rider could choose to switch on battery-powered assistance to reduce the effort required .
2. Restricted Use of ‘Electrically-Assisted Bikes’
Depending on local laws, many ‘e-bikes’ (e.g. pedelecs) are legally classified as bicycles rather than mopeds or motorcycles. This exempts them from the more stringent laws regarding the certification and operation of more powerful two-wheelers, which are often classed as electric motorcycles. The ‘electrically-assisted bikes’ are much like conventional bicycles in use and function, or in other words, the electric motor only provides assistance, for example, when the rider is climbing an uphill road or struggling against a headwind. Thus, these vehicles are especially useful for people in hilly areas, where riding a bike would prove too strenuous for many to consider taking up cycling as a daily means of transport. They are also useful specifically for riders who more generally need some assistance, e.g. for people with heart, leg muscle, or knee joint issues .
What features set this work apart from similar achievements?
The ‘electrically-assisted bikes’ have distinctive features as outlined below.
1. Sensors Installed on ‘Electrically-Assisted Bike’
For the ‘electrically-assisted bike’ to work, pedaling is required, but the rider can derive battery-powered assistance to reduce necessary efforts, as already stated. To drive this vehicle, two different sensors are necessary; one is a speed sensor, and the other a torque sensor. The former is installed for measuring the rotation rate of wheels, and the latter for calculating the force to step on pedals . By making the best use of these sensors, given an electric motor, both the vehicle’s speed and the rider’s pedaling force have been systematically controlled.
2. Batteries Used for ‘Electrically-Assisted Bikes’
The original ‘electrically-assisted bike’ released in 1993 used a bulky lead storage battery, whereas the newer models have been employing rechargeable batteries, such as sealed lead-acid (SLA), nickel-cadmium (Ni-Cd), nickel-metal hybrid (Ni-MH), and lithium-ion (Li-ion) batteries, which offer lighter, denser capacity batteries [2,3]. These batteries vary according to the voltage, total charge capacity, weight, the number of charging cycles before performance degrades, and ability to handle over-voltage charging conditions. The energy costs of operating these e-bikes are small, but there can be considerable battery replacement costs. The lifetime of a battery pack varies depending on the type of usage. Shallow discharge/ recharge cycles will help extend the overall battery life .
3. Spread of ‘Pedelecs’ and ‘S-Pedelecs’
As for the ‘electrically-assisted bike’ or ‘pedelec’, the pedal-assist cuts out once 25 km/h is reached, and the motor produces maximum continuous rated power of 250 watts or less . Owing to the realization of such ‘pedelecs’, more powerful e-bikes, called ‘S-Pedelecs’ have been successfully commercialized, each of which is equipped with a motor more powerful than 250 watts and less limited pedal-assist, i.e. the motor does not stop assisting the rider even if 25 km/h has been reached. These ‘S-Pedelecs’ are legally classified as mopeds or motorcycles rather than bikes and therefore may need to be registered and insured, for which the rider may have to carry some sort of driver’s license (either car or motorcycle). It should be added here that in USA many States have adopted ‘S-Pedelecs’ into the ‘Class 3 category’, in which the e-bikes are limited to 750 watts or less of power as well as 45 km/h or less of speed . It should be added here that according to TV news, the COVID pandemic is now accelerating the spread of not only ‘pedelecs’ but also ‘S-Pedelecs’.
Supporting texts and citations to establish the dates, location, and importance of the achievement: Minimum of five (5), but as many as needed to support the milestone, such as patents, contemporary newspaper articles, journal articles, or chapters in scholarly books. 'Scholarly' is defined as peer-reviewed, with references, and published. You must supply the texts or excerpts themselves, not just the references. At least one of the references must be from a scholarly book or journal article. All supporting materials must be in English, or accompanied by an English translation.
 S. Cairns, E. Behrendt, D. Raffo, C. Beaumont, C. Kiefer, “Electrically-assisted bikes: Potential impacts on travel behaviour”, Transportation Research Part A Policy and Practice, pp. 327-342, 103, Sept. 2017.  ‘Electric bicycle’; http://en.wikipedia.org/wiki/Felctric_bicycle.  ‘Electrically-assisted bikes’; https://ja.wikipedia.org/wiki/電動アシスト自転車 (in Japanese).  ‘Yamaha・PAS’; https://ja.wikipedia.org/wiki/ヤマハ・PAS (in Japanese).  ‘Best 5 Electric Pedal Assist Bike/Bicycles in 2021 Reviews’; http://bestratedelectricbikes.com/electric-assist-bike/
References  and  are written in Japanese, for which English abstracts are provided for reference in what follows.
(1) Reference : This article outlines ‘electrically-assisted bikes’ released by Yamaha Motor as well as by other providers. Concretely, the contents are concerned with the following items:
1: Outline, 2: Product Structure, 3: Electrically-Assisted Bikes in Several Countries
Japan, China, Korea, EU,
4: e-BIKE, 5: Electrically-Assisted Bikes and Sightseeing, 6: Remarks, 7: Main Makers in Japan, 8: Footnotes, 9: References.
(2) Reference : This article surveys the product of ‘Yamaha・PAS’, which is the first ‘electrically-assisted bike’ developed in 1993 by Yamaha Motor in Japan. The contents include the product name, a short history of production, an overview of the product, and references.
Supporting materials (supported formats: GIF, JPEG, PNG, PDF, DOC): All supporting materials must be in English, or if not in English, accompanied by an English translation. You must supply the texts or excerpts themselves, not just the references. For documents that are copyright-encumbered, or which you do not have rights to post, email the documents themselves to email@example.com. Please see the Milestone Program Guidelines for more information.
Please email a jpeg or PDF a letter in English, or with English translation, from the site owner(s) giving permission to place IEEE milestone plaque on the property, and a letter (or forwarded email) from the appropriate Section Chair supporting the Milestone application to firstname.lastname@example.org with the subject line "Attention: Milestone Administrator." Note that there are multiple texts of the letter depending on whether an IEEE organizational unit other than the section will be paying for the plaque(s).