Milestone-Proposal:MPD7720 DSP

From IEEE Milestones Wiki


To see comments, or add a comment to this discussion, click here.

Docket #:2018-14

This Proposal has been approved, and is now a Milestone


To the proposer’s knowledge, is this achievement subject to litigation? No

Is the achievement you are proposing more than 25 years old? Yes

Is the achievement you are proposing within IEEE’s designated fields as defined by IEEE Bylaw I-104.11, namely: Engineering, Computer Sciences and Information Technology, Physical Sciences, Biological and Medical Sciences, Mathematics, Technical Communications, Education, Management, and Law and Policy. Yes

Did the achievement provide a meaningful benefit for humanity? Yes

Was it of at least regional importance? Yes

Has an IEEE Organizational Unit agreed to pay for the milestone plaque(s)? Yes

Has the IEEE Section(s) in which the plaque(s) will be located agreed to arrange the dedication ceremony? Yes

Has the IEEE Section in which the milestone is located agreed to take responsibility for the plaque after it is dedicated? Yes

Has the owner of the site agreed to have it designated as an IEEE Milestone? Yes


Year or range of years in which the achievement occurred:

1980.

Title of the proposed milestone:

First Commercial Digital Signal Processor Chip, 1980

Plaque citation summarizing the achievement and its significance: Text absolutely limited by plaque dimensions to 70 words; 60 is preferable for aesthetic reasons.

In 1980, NEC (formerly Nippon Electric Company) developed here the first commercially available, programmable digital signal processor chip, the μPD7720. Its novel bus structure, 250-nsec instruction cycle, and 16-bit multiplier enabled fast finite impulse response filtering and provided true real-time processing for complex systems. It accelerated the adoption of digital signal processing in communications and broadcasting.

200-250 word abstract describing the significance of the technical achievement being proposed, the person(s) involved, historical context, humanitarian and social impact, as well as any possible controversies the advocate might need to review.


IEEE technical societies and technical councils within whose fields of interest the Milestone proposal resides.


In what IEEE section(s) does it reside?

IEEE Tokyo Section, Japan

IEEE Organizational Unit(s) which have agreed to sponsor the Milestone:

IEEE Organizational Unit(s) paying for milestone plaque(s):

Unit: IEEE Tokyo Section
Senior Officer Name: Yukitoshi Sanada

IEEE Organizational Unit(s) arranging the dedication ceremony:

Unit: IEEE Tokyo Section
Senior Officer Name: Toshihiko Sugie

IEEE section(s) monitoring the plaque(s):

IEEE Section: IEEE Tokyo Section
IEEE Section Chair name: Iwao Sasase

Milestone proposer(s):

Proposer name: Akihiko Sugiyama
Proposer email: Proposer's email masked to public

Proposer name: Takashi Miyazaki
Proposer email: Proposer's email masked to public

Please note: your email address and contact information will be masked on the website for privacy reasons. Only IEEE History Center Staff will be able to view the email address.

Street address(es) and GPS coordinates in decimal form of the intended milestone plaque site(s):

1753 Shimonumabe, Nakahara-ku, Kawasaki, Kanagawa, 211-8666, Japan35.57254306° N, 139.66515449° E

Describe briefly the intended site(s) of the milestone plaque(s). The intended site(s) must have a direct connection with the achievement (e.g. where developed, invented, tested, demonstrated, installed, or operated, etc.). A museum where a device or example of the technology is displayed, or the university where the inventor studied, are not, in themselves, sufficient connection for a milestone plaque.

Please give the address(es) of the plaque site(s) (GPS coordinates if you have them). Also please give the details of the mounting, i.e. on the outside of the building, in the ground floor entrance hall, on a plinth on the grounds, etc. If visitors to the plaque site will need to go through security, or make an appointment, please give the contact information visitors will need. The site will be located in NEC Tamagawa Plant where the NEC Semiconductor Division had been situated. The digital signal processor, PD7720 was developed in a building in the area.

Are the original buildings extant?

No.

Details of the plaque mounting:

The milestone plaque will be placed at the visitor entrance of the North and the South Building, Tamagawa Plant, NEC Corporation. The location is an area open to public during office hours so that anybody can see the milestone plaque.

How is the site protected/secured, and in what ways is it accessible to the public?

The intended plaque site is in a building located in NEC Tamagawa Plant. Security guards watch but visitors can freely visit there during office hours.

Who is the present owner of the site(s)?

NEC Corporation.

What is the historical significance of the work (its technological, scientific, or social importance)? If personal names are included in citation, include justification here. (see section 6 of Milestone Guidelines)

PD7720 is the first “commercially available” digital signal processor (DSP) chip in the world. It was presented at IEEE International Solid-State Circuits Conference (ISSCC) [1] and IEEE International Conference on Acoustic, Speech, and Signal Processing (ICASSP) [2] in 1980. In the same session of these conferences, another DSP developed by AT&T Bell Laboratories was presented [3, 4]. PD7720 was released in the market in 1980 [5-11] before the AT&T chip became available as DSP-20 only for AT&T’s internal use [12]. Texas Instruments (TI), which is recognized as the leader in the DSP market, announced its first DSP, TMS32010, in 1982 [13, 14]. However, it was necessary to wait for two more years until TMS32010 was released in the market until 1984 [12]. PD7720 had been the only DSP commercially available in the market until TMS32010 was released.

PD7720 was used to implement an ADPCM (adaptive differential pulse code modulation) codec of a palm size [15]. Because the tiny ADPCM codec board significantly impressed the ICASSP attendees, NEC was invited to join ITU-T (formerly CCITT) ADPCM standardization. In the course of standardization including evaluation by hardware, the flexibility (programmability) of PD7720 greatly helped establish the standard algorithm in the short period as originally planned. The resulting ADPCM standard includes floating-point multiplication which could not be implemented by the conventional DSPs. PD7720 was modified to make a new DSP, PD7730, with an 8x8 bit multiplier and a barrel shifter to implement floating-point multiplication essential to the ITU-T ADPCM standard [16, 17].

Because PD7720 had been available in the market since 1980 [5, 10, 11], there were a wide range of users in the world. The first user was Massachusetts Institute of Technology (MIT) whose paper on vocoder (low-bitrate speech encoder) first presented in May 1982 [18] and published with extensions in February 1983 [19]. μPD7720 was also used in speech synthesis [20] in those days. The biggest market for μPD7720 was modems [21] where an EPROM (erasable programmable ROM) version, μPD77P20 announced in 1981, was often used and the peak market share was over 90% [22]. A DSP with efficient pipeline operations suitable for modems was also developed in 1982 based on μPD7720 [19]. This chip allowed multiprocessor connection with no external logic. In the late 1980s, a shrunk CMOS version with an 8 MHz clock and an extended RAM, μPD77C25, was put in the market. μPD7720 is the origin of these descendent DSPs in the following years for various applications.

μPD7720 as well as its family chips enabled realtime signal processing in the 1980s, leading to cost reduction and spreading of technology based on signal processing. Included, but not limited to, are digital transmission signal modulation, speech, audio, and video coding, speech recognition/synthesis, signal enhancement/interference cancellation to name a few. From a viewpoint of products, telecommunication equipment such as switches and transmission terminals, multimedia players such as Walkman, mobile phone handset including smartphones, digital cameras and camcorders, digital TV receivers, car navigation systems, DVD recorders/players, PCs and tablet PCs are implemented by DSPs or DSP cores. We cannot live for a second without digital signal processors.

What obstacles (technical, political, geographic) needed to be overcome?

The biggest obstacle was multiplications. The instruction cycle of microprocessors in those days was 4 MHz. It means that only 40 thousand 16x16-bit multiplications/sec was feasible, each of which requires many shift operations and accumulations. This obstacle was overcome by a parallel connection of the 16x16-bit Booth multipliers [24] which necessitates half of the full adders compared to the conventional multipliers. To accommodate all necessary components, the chip had a 512 word x 13 bit data ROM, a 512 word x 23 bit instruction ROM, and a 128 word x 16 bit RAM in addition to the 16x16-bit multiplier, assuming voiceband signal processing. A maximum computational performance was guaranteed by memory address controllers and data bus connections. RAM/ROM address registers were implemented as a counter to eliminate load of a new value. The RAM had a ring buffer structure such that data transfer could be replaced by address count-up/down. The data at two addresses in the RAM could be transferred to the multiplier in parallel for multiplication in a single instruction cycle [25]. A past value of the ALU (arithmetic logical unit) and the output of the multiplier were provided with the ALU input for accumulation. A 23-bit word length of the instruction ROM enabled as many as six simultaneous operations, namely, update of two addresses, transfer of two data from the memories to the multiplier, transfer of the multiplier output to the ALU, and accumulation in the ALU. The 16x16-bit parallel multiplier and a novel data bus connections made it possible to efficiently perform multiply-and-add operations or, in another word, calculate an inner product of vectors. Filtering and Fourier Transform, which are both essential to typical signal processing applications such as a DTMF (dual-tone multi-frequency) receiver and an ADPCM codec (coder and decoder), consist of multiple multiply-and-add operations. The chip architecture design had been completed within a few weeks [11] to win the commercial market.

What features set this work apart from similar achievements?

Their commercial availability and fast multiplication with a novel data bus structure. Close collaboration between the research laboratory and the product division made μPD7720 commercially available soon after its announcement in 1980 [5, 10, 11], whereas AT&T’s DSP-20 was made available only within the company [12]. TI’s TMS32010 came into the market a couple of years later than μPD7720 [12]. Worldwide researchers and engineers benefit from flexibility of μPD7720 and its family chips, including an EPROM version announced in 1981, through quick prototyping of their algorithms and evaluation in realtime [11]. Compared to AT&T’s DSP-20, μPD7720 provides four-fold speedy multiplication due to single-clock multiplication capability [1, 2, 11, 26], leading to the true realtime processing for complex systems. A single-clock 16x16 bit multiplication, completed within a single instruction cycle of 250 nsec, and faster FIR (finite impulse response) filtering, which is one of the most common operations in signal processing including Fourier Transform, were significant advantages of NEC’s μPD7720. DSP-20 had a 4x20-bit partial multiplier and needs four times the instruction cycle, totaling 800 nsec to complete 16x20-bit multiplication [4, 27]. The fast multiplication of μPD7720 was made available by a 16x16-bit full multiplier and a novel multi-bus structure [1, 2, 11, 26]. Two input data could be supplied with the multiplier simultaneously via different buses so that it was not necessary to wait for the other data to arrive in the next instruction cycle [11, 26]. A novel data pointer structure, which consists of a 3-bit modifier register and a 4-bit counter, replaced time consuming data transfers in the tapped delay line of an FIR filter through the bus with a ring buffer and its start address shift. The 3-bit modifier register enabled a jump to one of the eight pages of the RAM and the 4-bit counter enabled a sequential access to continuous memory addresses in the tapped delay line.

Why was the achievement successful and impactful?


Supporting texts and citations to establish the dates, location, and importance of the achievement: Minimum of five (5), but as many as needed to support the milestone, such as patents, contemporary newspaper articles, journal articles, or chapters in scholarly books. 'Scholarly' is defined as peer-reviewed, with references, and published. You must supply the texts or excerpts themselves, not just the references. At least one of the references must be from a scholarly book or journal article. All supporting materials must be in English, or accompanied by an English translation.

1. Y. Kawakami, T. Nishitani, E. Sugimoto, E. Yamauchi, M. Suzuki, “A single-chip digital signal processor for voiceband applications,” Proc. ISSCC, WAM 3.2, pp. 40-41, February 1980. 2. T. Nishitani, Y. Kawakami, R. Maruta, A. Sawai, “LSI signal processor development for communications equipment,” Proc. ICASSP80, pp. 386-389, April 1980. 3. J. R. Boddie, G. T. Daryanani, I. I. Eldumiati, R. N. Gadenz, J. S. Thompson, S. M. Walters, and R. A. Pedersen, “A digital signal processor for telecommunications applications,” Digest of Tech. Papers, ISSCC, WAM 3.4, pp.44-45, Feb. 1980. 4. J. S. Thompson and J. R. Boddie, “An LSI digital signal processor,” Proc. ICASSP, pp. 383-385, Apr. 1980. 5. “Digital signal processing: NEC developed a fast micro-processor,” Nikkei Sangyo Shimbun (Japan Economic Industry Press), Feb. 14, 1980. (in Japanese) 6. “Microcomputer for digital signals: NEC made it on a single chip,” Nikkan Kogyo Shimbun (Daily Industry Press), Feb. 14, 1980. (in Japanese) 7. “Versatile and Economical: NEC developed a single-chip microcomputer for telecommunication,” Nihon Kogyo Shimbun (Japan Industry Press), Feb. 14, 1980. (in Japanese) 8. “Telecom-specific microcomputer developed by NEC: Single-chip and high-speed,” Denki Shimbun (Electrical News), Feb. 14, 1980. (in Japanese) 9. “NEC developed a telecom-specific single-chip microcomputer: At a price of 20K Yen,” Dempa Shimbun (Radio News), Feb. 18, 1980. (in Japanese) 10. NEC “μPD7720 Digital Signal Processing Interface,” Data Sheet, 1981. 11. R. Maruta, “At the dawn of the digital signal processing era, My association with Dr. Takao Nishitani,” IEEE Solid-State Circuits Magazine, Vol. 9, Issue 2, pp.25-29, Spring 2017. 12. T. Nishitani, “The advent of DSP and its growth in human society – Part 1,” IEICE Fundamental Review, Vol. 1, No. 4, pp. 17-29, Apr. 2008. (in Japanese) 13. S. S. Magar, E. R. Caudel, and A. W. Leigh, “A microcomputer with digital signal processing capability,” Digest of Tech. Papers, ISSCC, WAM 2.5, pp. 32-33, 284-285, Feb. 1982. 14. E. R. Caudel, R. K. Hester, and K-S. Tan, “A chip set for audio frequency digital signal processing,” Proc. ICASSP, pp. 1065-1068, April 1982. 15. T. Nishitani, S. Aikoh, T. Araseki, K. Ozawa, and R. Maruta, “A 32 kb/s toll quality ADPCM codec using a single chip signal processor”, Proc. of ICASSP, pp.960-963, April 1982. 16. M. Sato, Y. lshikawa, T. Nishitani, T. Kato, H. Saita, and Y. Aoki, “A single chip signal processor for CCITT standard ADPCM codec,” Digest of ISSCC, THPM 14.7, pp. 192-193, Feb. 1985. 17. T. Nishitani, I. Kuroda, M. Satoh, T. Katoh, R. Fukuda and Y. Aoki, “A CCITT standard 32 kbps ADPCM LSI codec”, Proc. of ICASSP, pp.1425-1428, April 1985. 18. J. A. Feldman, "A compact digital channel vocoder using commercial devices," ICASSP 1982, Vol. 7, pp1960-1963, May 1982. 19. J. A. Feldman, E. M. Hofstetter, and M. L. Malpass, “A compact, flexible LPC vocoder based on a commercial signal processing microcomputer,” IEEE Trans. ASSP, Vol. ASSP-31, No. 1, pp. 252-257, Feb. 1983. (Submitted on Aug. 17, 1982) 20. D. J. Quarmby and J. N. Holmes, “Implementation of a parallel-formant speech synthesizer using a single-chip programmable signal processor,” IEE Proceedings F, Vol. 131, Issue 6, pp. 563-569, Oct. 1984. 21. R. W. Cain, “Microprocessor Based 9600 BPS Modem,” Proc. ICASSP1985, 42.9, pp. 1633-1636, Apr. 1985. 22. Y. Kawakami, “Development of a digital signal processor,” Journal of the Society of Semiconductor Industry Specialists, No. 75, pp. 13-16, Apr. 2012. (in Japanese) 23. M. Yano, K. Inoue, and T. Senba, “An LSI digital signal processor,” Proc. ICASSP1982, pp. 1073-1076, May 1982. 24. T. Nishitani, “Two-term vector multiplier,” USP4215417, July 29, 1980 (Filed Jan. 27, 1978 [JP]). 25. T. Nishitani, “Sampled data processing system having memory with areas alternately dedicated to data I/O and data processing,” USP4287558, September 1, 1981 (Filed Sep. 29, 1977 [JP]). 26. T. Nishitani, R. Maruta, Y. Kawakami, H. Goto, “A single-chip digital signal processor for telecommunication applications,” IEEE J. of Solid-State Circuits, Vol. SC-16, No. 4, pp. 372-376, August 1981. 27. J. Boddie, “A brief history of AT&T’s first digital signal processor, Technology challenges in its development,” IEEE Solid-State Circuits Magazine, Vol. 9, Issue 2, pp.14-18, Spring 2017.

Supporting materials (supported formats: GIF, JPEG, PNG, PDF, DOC): All supporting materials must be in English, or if not in English, accompanied by an English translation. You must supply the texts or excerpts themselves, not just the references. For documents that are copyright-encumbered, or which you do not have rights to post, email the documents themselves to ieee-history@ieee.org. Please see the Milestone Program Guidelines for more information.

A. A. Sengupta, “Takao Nishitani and John S. Thompson receive the 2017 IEEE Donald O. Pederson Award in Solid-State Circuits,” IEEE Solid-State Circuits Magazine, Vol. 9, Issue 1, pp.65-66, Winter 2017. B. R. Jain, “The 2017 IEEE Donald O. Pederson Award Winners,” IEEE Solid-State Circuits Magazine, Vol. 9, Issue 2, pp. 13 and 40, Spring 2017. C. K. K. Parhi, “Takao Nishitani, An outstanding researcher, technical leader, and mentor,” IEEE Solid-State Circuits Magazine, Vol. 9, Issue 2, pp. 35-37, Spring 2017. D. H. Harasaki, “Real-time programmable DSPs for video processing, The challenges of their development,” IEEE Solid-State Circuits Magazine, Vol. 9, Issue 2, pp.30-34, Spring 2017. E. A picture of μPD7720 and μPD77P20.

Please email a jpeg or PDF a letter in English, or with English translation, from the site owner(s) giving permission to place IEEE milestone plaque on the property, and a letter (or forwarded email) from the appropriate Section Chair supporting the Milestone application to ieee-history@ieee.org with the subject line "Attention: Milestone Administrator." Note that there are multiple texts of the letter depending on whether an IEEE organizational unit other than the section will be paying for the plaque(s).

Please recommend reviewers by emailing their names and email addresses to ieee-history@ieee.org. Please include the docket number and brief title of your proposal in the subject line of all emails.