Milestone-Proposal talk:Invention of Temparature- Insensitive Quartz Oscillation Plate Enabling HIghly Stable Communications and Clocks, 1933
Advocates and reviewers will post their comments below. In addition, any IEEE member can sign in with their ETHW login (different from IEEE Single Sign On) and comment on the milestone proposal's accuracy or completeness as a form of public review.
Comments and modification to citation -- Enrique Tejera (talk) 14:01, 29 April 2016 (CDT)
I am the advocate for the proposed milestone Temperature-Insensitive Quartz Oscillation, 1933. I have revised all the material included in the proposal and found it complete with the technical merits to be accepted as an IEEE Milestone.
During the revision I have been able to check on the material submitted and the conflicts that may be with other developments related to the topic, but the submitted data shows enough to prove the validity of the proposed milestone.
Regarding citation and trying to make it readable for everybody, here is a suggestion to modify it:
Invention of Temperature-Insensitive Quartz Oscillation Plate, 1933
In April 1933, Issac Koga of the Tokyo Institute of Technology discovered cutting angles that produced quartz crystal plates having a zero temperature coefficient of frequency. These angles, 54⁰ 45’ and 137⁰ 59’, he named the R1 and R2 cuts. Temperature-insensitive quartz crystal was used at first for radio transmitters and later for clocks, and has proven indispensable to all radio communication systems and much of information electronics.
Advocate approval of IEEE Milestone proposal 2015-15 Temperature-Insensitive Quartz -- Enrique Tejera (talk) 14:27, 1 June 2016 (CDT)
The proposed changes to the citation was sent to the proposer and it was accepted with the following text received on May 16, 2016
Dear Robert Colburn and Enriqe Tejera, cc: Kenichi Iga
I thank you for your information on the status of the proposal for the IEEE Milestone on “Invention of Temperature-Insensitive Quartz Oscillation Plate Enabling Highly Stable Communications and Clocks, 1933”.
We are pleased to hear that you will recommend the proposal to the IEEE History Committee.
With respect to your advice for the modification of the citation, we agree with your modification. I logged on to the proposal and checked the current status of the citation. I found that your suggestion for the modification was already reflected.
Yours sincerely, Taiji Nishizawa
I support the approval of this and an IEEE Milestone - with corrections to the spelling (temparature) and grammar (add space between temperature and the dash.
Re: Citation -- Administrator4 (talk) 10:04, 3 June 2016 (CDT)
- The spelling is correct in the citation. Do not worry about the page URL, it will change if/when the proposal is approved anyway. Hyphens (which is what that is, not a dash) do not get spacing.
Re: Citation -- Allisonmarsh (talk) 13:18, 3 June 2016 (CDT)
I support this milestone. I had to re-read the citation several times to fully understand it, which I think might make it difficult for someone who just encounters it while passing by. However, I do think the information is clear.
I agree with Allison's remark. I support the proposal.
Comment on behalf of John Vig -- Administrator5 (talk) 07:51, 6 June 2016 (CDT)
I propose that the citation be modified by inserting "A" into the citation; i.e., instead of
Invention of Temperature-Insensitive Quartz Oscillation Plate, 1933 the citation should be Invention of *A* Temperature-Insensitive Quartz Oscillation Plate, 1933
The reason is that the first temperature-insensitive quartz oscillation plate was invented prior to 1933. Koga was one of the early inventors but not the first inventor. The first temperature-insensitive quartz oscillation plate was the AT-cut, as stated in, for example, Bottom's book, see attached pages. (The AT-cut was invented at RCA, in the USA.)
I support the proposal as amended.
- 1 Comments and modification to citation -- Enrique Tejera (talk) 14:01, 29 April 2016 (CDT)
- 2 Advocate approval of IEEE Milestone proposal 2015-15 Temperature-Insensitive Quartz -- Enrique Tejera (talk) 14:27, 1 June 2016 (CDT)
- 3 Citation -- Djkemp (talk) 20:54, 2 June 2016 (CDT)
- 4 -- Savini (talk) 05:25, 6 June 2016 (CDT)
- 5 Comment on behalf of John Vig -- Administrator5 (talk) 07:51, 6 June 2016 (CDT)
- 6 I support the proposal as corrected by Vig, et al. -- Microman (talk) 08:28, 6 June 2016 (CDT)