Milestone-Proposal talk:Fiber optic connectors: Difference between revisions

From IEEE Milestones Wiki
Line 35: Line 35:
Reference [2]:
Reference [2]:
This journal article is in Japanese. If possible, the appropriate journal article in English should be used."
This journal article is in Japanese. If possible, the appropriate journal article in English should be used."
== Second external review of proposal -- [[User:Vardalas|John Vardalas]] ([[User talk:Vardalas|talk]]) 01:34, 31 October 2019 (UTC) ==
Below are Dr.Shin'ichi Iwano's responses to the questions I put to him regarding the merits of this proposal. Dr. Iwano is the Executive Manager. Global Business Headquarters. NTT Advanced Technology Corporation. My questions are bolded
'''What is the historical significance of the work (its technological, scientific, or social importance)?'''
I believe it is very clear that the proposed PC connection with a push-pull coupling mechanism has a historical-technological significance. A fiber optic connector has a technological difficulty compared to electrical connectors, and was a big challenge. Most of all communication laboratories including NTT's Labs, AT&T's Bell Labs, BT Labs, Telecom Italia CSELT, etc., had researched and developed a various optical connectors and connection technologies until 1980s. These had been replaced and unified to the PC connection with a push-pull coupling mechanism when after it had proposed in the end of 1980s. The PC connection with a push-pull coupling mechanism over comes the challenges realizing precise alignment of the connecting two fibers in ease of operation and with high reliability in low cost.
'''What obstacles (technical, political, geographic) needed to be overcome?'''
Fiber optic connectors are needed to realize low insertion losses, low reflection between connecting fibers, high long-term-durability, ease of operation and maintenance, and low in cost of the connectors.
However, it was a big challenges because the fiber optic connector should precisely align fiber cores of two mating fibers in 1 micrometer or less,0.1 degree or less in tilt, and no separation. Also these precise alignment should be realized by easy human operation. This also should be kept in long terms in various severe circumstance.
In order to overcome this challenge a lot of experiment results and thick theoretical discussion had done in the end of 1980's - early 1990 which were summarized technical papers and technical and scientific conference presentations. Based on these theoretical and experimental results, the PC connection with a push-pull coupling mechanism had proposed, which overcome and satisfy all of such all requirements.
Therefore most of current optic connectors utilize the technology of the PC connection with a push-pull coupling mechanism.
'''What features set this work apart from similar achievements?'''
Until the provision of the PC connection with a push-pull coupling mechanism, a variety of connectors had been developed utilizing various coupling mechanisms and had been used for the realization of fiber optic network systems. They were AT&T' biconic ferrule connectors and ST connectors, NTT's FC connectors, and EU's EC connectors, etc. Some put matching gel between two connectors to reduce reflection which is not good for repeated connection and is not good to realize long time durability. Some others used flat polished ferrules which had a large reflection and a relatively large insertion loss. Some other connectors utilized angular polished ferrule to reduce the reflection: however this having some large insertion losses. In addition, most old connectors used screw nut coupling mechanism which is not ease to operate compared to the push-pull coupling mechanism.
Please assess the strengths and weaknesses of the answers given by the proposers.
'''Have they established clear historical significance?'''
As stated as above, most of all fiber optic connectors uses the PC connection with a push-pull coupling mechanism. We can find connectors uses the PC connection with a push-pull coupling mechanism anywhere and any systems fiber connectors are using. 
'''Are their arguments technically strong?'''
Yes I think so.
'''Do the answers adequately support the Milestone claim:
"In 1986, Nippon Telegraph and Telephone Corp. (NTT) invented the physical contact (PC) connection technology that has proved fundamental in supporting the performance and reliability of fiber optic connectors. NTT invented SC and MPO connectors that provide PC connection with a push-pull coupling mechanism for high-density connection and superior operability. SC and MPO connectors are widely used by carrier networks and data center networks throughout the world."'''
I believe that the description provided by the proposer is very correct.
'''In your view is the wording of the citation accurate? Finally have they provided adequate "Supporting texts and citations to establish the dates, location, and importance of the achievement"?'''
Yes, I think it is accurate.
'''Please feel free to express any additional views on this proposed Milestone and make any suggestions for improvement.'''
The physical contact (PC) connection technology and the SC and MPO connectors have been standardized not only in the proposer's country but also in most countries worldwide where fiber optic network systems installed. Most of all fiber optic connector manufactures provide these connectors worldwide. These were have greatly help to construct today's fiber optic network systems worldwide.

Revision as of 01:34, 31 October 2019

Advocate for this Milestone Proposal -- John Vardalas (talk) 20:14, 7 August 2019 (UTC)

I've been asked to be the advocate for this proposal. I'm currently developing a list of external expert reviewers. My goal is to get three reviewers. For the moment I have two who have agreed to review the proposal. When their reviews are ready they will be posted on this Discussion Page. When I have a third reviewer, his, or her, review will also be posted.

Once all the reviews are posted we can proceed with the evaluation of this proposal. In the meantime I am bringing myself up to speed on this proposal. I'm looking forward to moving this Milestone forward to the next step in the process.

John Vardalas, Ph.D. Member, IEEE History Committee

First external review of proposal -- John Vardalas (talk) 01:13, 31 October 2019 (UTC)

Posting of a review by Dr. Mitsuru Kihara, Professor, Osaka Electro-Communication University, Japan. This is an exact copy of his review.


"The proposal shows that the proposers invented the physical contact (PC) connection technology that have proved fundamental in supporting the performance and reliability of fiber optic connectors. The proposers used the PC connection technology to develop an SC connector and an MPO connector as representative simplex and multiplex fiber optic connectors. Both connectors are widely used throughout the world.

I agree that the work is historically significant for optical fiber communication systems. Many fiber optic connectors that are currently in practical use are based on the invented PC connection technology. I think that proposers established clear historical significance. Their arguments are technically strong. The answers adequately support the Milestone claim.

Many kinds of fiber optic connectors have been developed and currently used in optical fiber network systems. Fiber connections, except fusion splices, are classified into two types of connection states. One is a connection with physical contact (PC), and the other uses refractive-index matching material. PC-type connectors are mostly used for intra-office fiber connections and premises where frequent reconnections are required. In contrast, connectors and mechanical splices with refractive-index matching material are mostly used in outside facilities, where frequent reconnections are unnecessary. Therefore, PC-type connectors have superior operability.

The work contributes to realize physical contact (PC) connection technology and most major PC-type connectors that are currently in practical use throughout the world. The PC connection technology have important factors such as push-pull coupling mechanism and high-precisely polishing ferrule end-face. Using the PC connection technology, the proposers have developed SC and MPO connectors. Both SC and MPO connectors could realize excellent operability and high density connection. In addition, both SC and MPO connectors employed plastic-molded components and they could lead to cost-effective connection. Consequently, the invented PC connection technology and these developed SC and MPO connectors are historically important for optical fiber communication systems.

Finally, I think that the wording of the citation is accurate.


My advice:

With the answers to “What obstacles (technical, political, geographic) needed to be overcome?”, In second sentence of second paragraph: The sentence “and they use an expensive ceramic ferrule” should be deleted. This is why SC connectors also use a ceramic ferrule and could not lead to low cost.

With the “Supporting texts and citations to establish the dates, location, and importance of the achievement”, Reference [2]: This journal article is in Japanese. If possible, the appropriate journal article in English should be used."

Second external review of proposal -- John Vardalas (talk) 01:34, 31 October 2019 (UTC)

Below are Dr.Shin'ichi Iwano's responses to the questions I put to him regarding the merits of this proposal. Dr. Iwano is the Executive Manager. Global Business Headquarters. NTT Advanced Technology Corporation. My questions are bolded

What is the historical significance of the work (its technological, scientific, or social importance)?

I believe it is very clear that the proposed PC connection with a push-pull coupling mechanism has a historical-technological significance. A fiber optic connector has a technological difficulty compared to electrical connectors, and was a big challenge. Most of all communication laboratories including NTT's Labs, AT&T's Bell Labs, BT Labs, Telecom Italia CSELT, etc., had researched and developed a various optical connectors and connection technologies until 1980s. These had been replaced and unified to the PC connection with a push-pull coupling mechanism when after it had proposed in the end of 1980s. The PC connection with a push-pull coupling mechanism over comes the challenges realizing precise alignment of the connecting two fibers in ease of operation and with high reliability in low cost.

What obstacles (technical, political, geographic) needed to be overcome?

Fiber optic connectors are needed to realize low insertion losses, low reflection between connecting fibers, high long-term-durability, ease of operation and maintenance, and low in cost of the connectors. However, it was a big challenges because the fiber optic connector should precisely align fiber cores of two mating fibers in 1 micrometer or less,0.1 degree or less in tilt, and no separation. Also these precise alignment should be realized by easy human operation. This also should be kept in long terms in various severe circumstance. In order to overcome this challenge a lot of experiment results and thick theoretical discussion had done in the end of 1980's - early 1990 which were summarized technical papers and technical and scientific conference presentations. Based on these theoretical and experimental results, the PC connection with a push-pull coupling mechanism had proposed, which overcome and satisfy all of such all requirements. Therefore most of current optic connectors utilize the technology of the PC connection with a push-pull coupling mechanism.

What features set this work apart from similar achievements?

Until the provision of the PC connection with a push-pull coupling mechanism, a variety of connectors had been developed utilizing various coupling mechanisms and had been used for the realization of fiber optic network systems. They were AT&T' biconic ferrule connectors and ST connectors, NTT's FC connectors, and EU's EC connectors, etc. Some put matching gel between two connectors to reduce reflection which is not good for repeated connection and is not good to realize long time durability. Some others used flat polished ferrules which had a large reflection and a relatively large insertion loss. Some other connectors utilized angular polished ferrule to reduce the reflection: however this having some large insertion losses. In addition, most old connectors used screw nut coupling mechanism which is not ease to operate compared to the push-pull coupling mechanism. Please assess the strengths and weaknesses of the answers given by the proposers.

Have they established clear historical significance?

As stated as above, most of all fiber optic connectors uses the PC connection with a push-pull coupling mechanism. We can find connectors uses the PC connection with a push-pull coupling mechanism anywhere and any systems fiber connectors are using.

Are their arguments technically strong?

Yes I think so.

Do the answers adequately support the Milestone claim: "In 1986, Nippon Telegraph and Telephone Corp. (NTT) invented the physical contact (PC) connection technology that has proved fundamental in supporting the performance and reliability of fiber optic connectors. NTT invented SC and MPO connectors that provide PC connection with a push-pull coupling mechanism for high-density connection and superior operability. SC and MPO connectors are widely used by carrier networks and data center networks throughout the world."

I believe that the description provided by the proposer is very correct.

In your view is the wording of the citation accurate? Finally have they provided adequate "Supporting texts and citations to establish the dates, location, and importance of the achievement"?

Yes, I think it is accurate.

Please feel free to express any additional views on this proposed Milestone and make any suggestions for improvement.

The physical contact (PC) connection technology and the SC and MPO connectors have been standardized not only in the proposer's country but also in most countries worldwide where fiber optic network systems installed. Most of all fiber optic connector manufactures provide these connectors worldwide. These were have greatly help to construct today's fiber optic network systems worldwide.