To see comments, or add a comment to this discussion, click here.
This Proposal has been approved, and is now a Milestone
To the proposer’s knowledge, is this achievement subject to litigation?
Is the achievement you are proposing more than 25 years old? Yes
Is the achievement you are proposing within IEEE’s designated fields as defined by IEEE Bylaw I-104.11, namely: Engineering, Computer Sciences and Information Technology, Physical Sciences, Biological and Medical Sciences, Mathematics, Technical Communications, Education, Management, and Law and Policy. Yes
Did the achievement provide a meaningful benefit for humanity? Yes
Was it of at least regional importance? Yes
Has an IEEE Organizational Unit agreed to pay for the milestone plaque(s)? Yes
Has an IEEE Organizational Unit agreed to arrange the dedication ceremony? Yes
Has the IEEE Section in which the milestone is located agreed to take responsibility for the plaque after it is dedicated? Yes
Has the owner of the site agreed to have it designated as an IEEE Milestone? Yes
Year or range of years in which the achievement occurred:
Title of the proposed milestone:
Dadda's Multiplier, 1965
Plaque citation summarizing the achievement and its significance:
In what IEEE section(s) does it reside?
IEEE Organizational Unit(s) which have agreed to sponsor the Milestone:
IEEE Organizational Unit(s) paying for milestone plaque(s):
Unit: ITALY SECTION
Senior Officer Name: Ermanno Cardelli
IEEE Organizational Unit(s) arranging the dedication ceremony:
Unit: ITALY SECTION
Senior Officer Name: Ermanno Cardelli
Unit: ITALY SECTION COMPUTER SOCIETY CHAPTER
Senior Officer Name: Sabrina De Capitani di Vimercati
IEEE section(s) monitoring the plaque(s):
IEEE Section: ITALY SECTION
IEEE Section Chair name: Ermanno Cardelli
Proposer name: Vincenzo Piuri
Proposer email: Proposer's email masked to public
Please note: your email address and contact information will be masked on the website for privacy reasons. Only IEEE History Center Staff will be able to view the email address.
Street address(es) and GPS coordinates of the intended milestone plaque site(s):
Politecnico di Milano, DEIB via Ponzio 34/5, 20133 Milano, Italy GPS: 45.478662, 9.232546
Describe briefly the intended site(s) of the milestone plaque(s). The intended site(s) must have a direct connection with the achievement (e.g. where developed, invented, tested, demonstrated, installed, or operated, etc.). A museum where a device or example of the technology is displayed, or the university where the inventor studied, are not, in themselves, sufficient connection for a milestone plaque.
Please give the address(es) of the plaque site(s) (GPS coordinates if you have them). Also please give the details of the mounting, i.e. on the outside of the building, in the ground floor entrance hall, on a plinth on the grounds, etc. If visitors to the plaque site will need to go through security, or make an appointment, please give the contact information visitors will need. Department of Electronics, Information and Bioengineering of Politecnico di Milano. This is a university building, in which most of the research activity of the inventor (prof Luigi Dadda) has been carried out till his death in 2012. There are no other historical markers at this site.
Are the original buildings extant?
Details of the plaque mounting:
ground floor entrance hall.
How is the site protected/secured, and in what ways is it accessible to the public?
the plaque is inside the building in the main hall, monitored by the receptionist during opening hours and protected by alarm when the building is closed. the plaque will be located in a place freely accessible to the public during the opening hours of the building (typically 8am-8pm).
Who is the present owner of the site(s)?
Politecnico di Milano, one of the most renown universities for engineering in Italy.
What is the historical significance of the work (its technological, scientific, or social importance)?
What obstacles (technical, political, geographic) needed to be overcome?
What features set this work apart from similar achievements?
Supporting texts and citations to establish the dates, location, and importance of the achievement: Minimum of five (5), but as many as needed to support the milestone, such as patents, contemporary newspaper articles, journal articles, or chapters in scholarly books. 'Scholarly' is defined as peer-reviewed, with references, and published. You must supply the texts or excerpts themselves, not just the references. At least one of the references must be from a scholarly book or journal article. All supporting materials must be in English, or accompanied by an English translation.
Supporting materials (supported formats: GIF, JPEG, PNG, PDF, DOC): All supporting materials must be in English, or if not in English, accompanied by an English translation. You must supply the texts or excerpts themselves, not just the references. For documents that are copyright-encumbered, or which you do not have rights to post, email the documents themselves to firstname.lastname@example.org. Please see the Milestone Program Guidelines for more information.
Please email a jpeg or PDF a letter in English, or with English translation, from the site owner(s) giving permission to place IEEE milestone plaque on the property, and a letter (or forwarded email) from the appropriate Section Chair supporting the Milestone application to email@example.com with the subject line "Attention: Milestone Administrator." Note that there are multiple texts of the letter depending on whether an IEEE organizational unit other than the section will be paying for the plaque(s).